SVs for train number displays

 FREMO Contents   FREMO-STW   ZNF800   Display boards   

Table of implemented SVs

Warning: the "new" SV numbering applies to the actual software version for panel I/O
SV # Description
old new
5 10 Display intensity in percent, range [0..100]
Meaning for HDSP-2112 based displays:
Value Meaning Config Word D2..0
81..255 100% (default) 0
54..80 80% 1
41..53 53% 2
28..40 40% 3
21..27 27% 4
14..20 20% 5
0..13 13% 6
6 11 Orientation:
ValueMeaning
0 normal (default)
1 upside down
2 controlled by dedicated input
3 controlled by LocoNet message
7 12 Switch address for flashing display, least significant bits
8 13 Switch address for flashing display, most significant bits
9 14 Mode select (only UbTestMode software):
ValueMeaning
0 SpDrS60 board ver. 1 with 14 Outputs
1 SpDrS60 board ver. 1 with ZN
2 SpDrS60 board ver. 2 with 14 Outputs
3 SpDrS60 board ver. 2 with ZN
4 Michelstadt board ver. 1 (7 Outputs, 13 Inputs)
5 Michelstadt board ver. 1 & ZN (7 Outputs, 9 Inputs)
100 Address of the ZN field that comes first in the SPI chain, least significant bits
101 Address of the ZN field that comes first in the SPI chain, most significant bits
102 Address of the ZN field that comes second in the SPI chain, least significant bits
103 Address of the ZN field that comes second in the SPI chain, most significant bits
104..119 more addresses for ZN fields, overall number depends on CHAIN_LENGTH definition, this is currently 10 display fields

 FREMO Contents   FREMO_STW   ZNF800   Display boards   

Author of this page: Stefan Bormann. Valid HTML 4.01 Transitional SourceForge.net Logo